Guide to PPWR EPR Symbols and QR Codes

Posted on — Leave a comment

Until now, there have been several symbols used to indicate an extended producer responsibility for packaging in the EU. However, the Packaging and Packaging Waste Regulation (PPWR) is set to replace standalone EPR scheme symbols like the Green Dot with a QR code.

This guide explains what you need to know before these rules start to apply on 12 February 2027.

Key points

  • QR codes replace EPR symbols like the Green Dot
  • Article 12(9) does not state that indicating an EPR symbol is mandatory
  • When doing so, you must use a QR code

Video correction

Triman is not strictly an EPR scheme symbol, so it is not affected by the new QR code requirements. However, the Green Dot is, and the general principle explained in the video is correct. Article 12(9) specifically mentions symbols used to indicate EPR schemes.

CGP


Find Requirements for Your Product Free

Estimated time: 2 to 3 minutes

  • Step 1: Select market
    US EU UK Canada Australia
  • Step 2: Select product/material modules
  • Step 3: Compliance Requirements List Created View Sample >

CREATE A FREE ACCOUNT

data Data: Primarily based on official legislation databases (Learn >)

Free Consultation (30 min)

Do you have questions about US, EU, or UK product compliance requirements?

New QR code required in February 2027

PPWR EPR Symbols and QR Codes

The new EPR symbol requirements can be found in Article 12(9).


9. By 12 February 2027, packaging included in an extended producer responsibility scheme may be identified throughout the territory of the Member States in which that scheme or system applies. Such identification shall be achieved only by means of a corresponding symbol in a QR code or other standardised, open, digital-marking technology in order to indicate that the producer fulfils its extended producer responsibility obligations. That symbol shall be clear and unambiguous and shall not mislead consumers or other end users as to the recyclability or reusability of the packaging.


Here is a summary of the key points:

✅ Packaging included in an EPR scheme may be identified

✅ If you do so, then you must display the symbol in a QR code

✅ Or, other standardised, open, digital-marking technology

Does the PPWR require EPR symbols like the Green Dot?

No, the Packaging and Packaging Waste Regulation (PPWR) does not require or allow for the use of standalone EPR scheme symbols like the Green Dot. As you can read in Article 12(9), such symbols are not mandatory. But when these are used, they must be in a QR code.

Does the QR code replace the Green Dot?

Yes, the QR code replaces standalone EPR scheme symbols, including the Green Dot. That said, PRO Europe has developed a new version called the DigiDot, which places a small version of the Green Dot inside a QR code.

As such, brands that wish to continue displaying a symbol can do so if they update their artwork.

Can we continue using the Green Dot?

Only if you use the new version of the Green Dot, which is integrated into a QR code. You can find this version on the PRO Website.

Does Article 12(9) of the PPWR mandate a QR code?

No, it does not state that the QR code is mandatory for the sake of displaying the EPR symbol. It says that you may do so. The QR code becomes a requirement when this is done.

Does the QR code replace the Triman?

No, our research indicates that the Triman is not replaced by the QR code mentioned in Article 12(9) on the basis that the Triman is not an EPR scheme symbol (which the Green Dot is) but is used to indicate separate collection.

Is the QR code the same thing as the harmonised label?

No, the use of QR codes to display EPR symbols is not the same thing as the PPWR harmonised label.

The harmonised label is described in Article 12(1) and is expected to be finalised in a future amendment of the PPWR, or a separate delegated act.

Do we need to relabel existing packaging after 12 February 2027?

No, you do not need to relabel packaging that is currently held by retailers and wholesalers. Details can be found in point 14 of the PPWR:


(14) Packaging should be placed on the market only if it complies with the sustainability requirements and labelling requirements laid down in or pursuant to this Regulation. Packaging should be considered to have been placed on the market when the packaging is made available for the first time on the Union market, which means supplied by the manufacturer or importer for distribution, consumption or use in the course of a commercial activity, whether in return for payment or free of charge. Thus, packaging already placed on the Union market before the date of application of relevant requirements and in the stocks of distributors, including retailers and wholesalers, should not need to meet the sustainability and labelling requirements laid down in or pursuant to this Regulation.


Based on this, the following types of packaging do not need to meet the new labelling requirements:

✅ Packaging already on the EU market before the date of application of relevant requirements

✅ The packaging is in stock with distributors (including retailers and wholesalers) before the date

But, be aware of the following:

❌ Packaging that is manufactured but has not yet arrived in the EU from a third country is not yet “placed on the market” and therefore covered by the rules that apply on the date of arrival.

TImeline Scenarios

Timeline EU manufacturer EU importer
Packaging manufacturing date 2027-01-02 2027-01-02
Placed on the EU market 2027-01-02 2027-02-18
Stocked by distributors 2027-01-28 2027-02-22
Result Delivered before deadline Too late

I should also mention that Article 12(12) also provides a 3-year grace period:


Packaging as referred to in paragraphs 1, 2 and 4 that is manufactured in the Union or imported before the deadlines referred in those paragraphs and that does not comply with the criteria laid down in those paragraphs may be made available on the market until 3 years from the date of entry into force of the labelling requirements laid down in those paragraphs.


But there is no mention of Article 12(9) here, which is the part that concerns QR codes replacing standalone EPR symbols. As such, I cannot find anything supporting the view that the QR code would be subject to the same conditions.

  • CGP


    Find Requirements for Your Product Free

    Estimated time: 2 to 3 minutes

    • Step 1: Select market
      US EU UK Canada Australia
    • Step 2: Select product/material modules
    • Step 3: Compliance Requirements List Created View Sample >

    CREATE A FREE ACCOUNT

    data Data: Primarily based on official legislation databases (Learn >)

    Free Consultation (30 min)

    Do you have questions about US, EU, or UK product compliance requirements?


    Disclaimer: The Site cannot and does not contain legal advice. The legal information is provided for general informational and educational purposes only and is not a substitute for professional advice. Accordingly, before taking any actions based upon such information, we encourage you to consult with the appropriate professionals. We do not provide any kind of legal advice. THE USE OR RELIANCE OF ANY INFORMATION CONTAINED ON THE SITE IS SOLELY AT YOUR OWN RISK.

    Full Disclaimer: Link

    Sources: Our articles are written in part based on publicly available information, and our own practical experience relating to product compliance. These are some of the primary sources we use:

    • European Commission - europa.eu
    • EUR-Lex - eur-lex.europa.eu
    • European Chemicals Agency - echa.europa.eu
    • eCFR - ecfr.gov
    • U.S. Consumer Product Safety Commission - cpsc.gov
    • U.S. Federal Trade Commission - ftc.gov
    • U.S. Federal Communications Commission - fcc.gov
    • GOV.UK
    • Legislation.gov.uk
    • Laws-lois.justice.gc.ca
    • Legislation.gov.au

    Licenses

    EU: Creative Commons Attribution 4.0 International (CC BY 4.0) licence (Link)

    UK: Contains public sector information licensed under the Open Government Licence v3.0.

    AU: Contains information licensed under the Creative Commons Attribution 4.0 International (the CC BY 4.0 licence)
  • Leave a Reply

    Your email address will not be published. Required fields are marked *

    Estimated time: 2 to 3 minutes

    Compliance Gate Platform

    Find Product Requirements in 3 Steps

    Close the CTA
    Data: Primarily based on official legislation databases (Learn >)
    Step 1: Select market
    Step 2: Set product modules / specs
    Step 3: Requirements List Created Sample >